GAUGE, Mortice -2-
H1989.228.a-b
Wheelwright's and Coachbuilder's mortice gauges. Each consists of a large square-sectioned stock with 2 movable square pegs fitted into it at right angles. At one end of each of the pegs is a screw long enough to project through it. The ends of the screws have been machined to a wedge shape and point downwards. One edge of the stocks has been rounded, the others are square. The gauge is used for marking out the two sides of a mortice hole. So far as Salaman's DICTIONARY knows they are always homemade.
[.a] The stock is 1 1/4 inches square, the pegs are 3/8 inches. One screw is held in place with copper wire. The sides of the stock are stamped 'C C' and both ends '1933'.
[.b] The stock is 1 3/4 inches square, the pegs are 9/16 inches square.
Department:
History DepartmentCollection
Accession Number: | H1989.228.a-b |
---|---|
Accession Date: | 14 Apr 1989 |
Material
Wood/Wood | Wood, metal. | 0 - Whole |
---|
Metal/Metal | 0 - Whole |
---|
Measurement
length | 150mm |
---|
width | 150mm |
---|
height | 170mm | a cm |
---|
length | 150mm |
---|
width | 150mm |
---|
height | 170mm | b |
---|
The WA Museum is in the process of digitising its collections. This record may not have been reviewed by curatorial staff and may be inaccurate or incomplete. Research departments are continually working on these collections by adding new objects and reviewing existing content when new information is made available.
Enquiries can be emailed to reception@museum.wa.gov.au
Cite this page
Western Australian Museum Collections https://museum.wa.gov.au/online-collections/content/H1989.228.-b
Accessed 27 Aug 2024
Rights
We support the open release of data and information about our collections.
Text content on this page is licensed under a Creative Commons Attribution 4.0 International License.
Image content on this page is copyright WA Museum.