INDOOR BELL, Electric
CH1980.412
Pear shaped, electric bell. Silver plated. Pear with part of the stem and four leaves. Unscrews near middle of the pear. Hole in bottom end for push button. This is a casein button which pushes one metal plate onto another to form a closed circuit for an electric current to run. These metal plates are fixed to a piece of wood which is the only form of insulation. The remains of two cotton covered copper wires are connected to these two plates. A third whire is unconnected. These wires come out through a wire in the top of the pear. This was probably used as an indoor bell.
Department:
History DepartmentCollection
Accession Number: | CH1980.412 |
---|---|
Accession Date: | 7 Aug 1980 |
Material
Silver Plate/Metal | 0 - Whole |
---|
Copper/Metal | 0 - Whole |
---|
Metal/Metal | 0 - Whole |
---|
Wood/Wood | 0 - Whole |
---|
Cotton/Textile | 0 - Whole |
---|
Measurement
length | 100mm | overall |
---|
diameter | 40mm |
---|
The WA Museum is in the process of digitising its collections. This record may not have been reviewed by curatorial staff and may be inaccurate or incomplete. Research departments are continually working on these collections by adding new objects and reviewing existing content when new information is made available.
Enquiries can be emailed to reception@museum.wa.gov.au
Cite this page
Western Australian Museum Collections https://museum.wa.gov.au/online-collections/content/CH1980.412
Accessed 3 Sep 2024
Rights
We support the open release of data and information about our collections.
Text content on this page is licensed under a Creative Commons Attribution 4.0 International License.
Image content on this page is copyright WA Museum.