(.1) White enamel coated metal electric mixer with parallel base and top connected by side column. The column of the mixer is hinged to lift up from bowl. Printed in black across side of colum "Kenwood/"Chef" ". There is a black dial below this writing, with speed graduations from "OFF" up to "12". There is a round plastic insert inside the bowl indent on the base, to place the mixing bowl on. It has patent details printed in black on it and the make and model of the mixer "THE/Kenwood/REGD. "Chef"/MODEL NO. A 700/ELECTRIC FOOD MIXER". The top (arm) of the mixer has a black plastic section which lifts off to reveal a metal plate on which other attachments such liquidiser and mincer can be attached. There is a handle moulded into harm. Extending from base of arm is stainless steel metal fitting, into which mixer attachments are inserted. White plastic electric cord extends from base.
(.2) Large white glazed china mixing bowl, with grooves at base to slot into mix master. It has two small handles at opposite sides, with "Kenwood" embossed on each handle.
(.3) Stainless steel whisk attachment with four metal wires looped to make the "balloon" of the whisk.
(.4) Metal mixer attachment, with beating mechanism in the shape of a letter "K" outlined in a semi circle.
(.5) Dough hook. Metal mixer attachment, with beating mechanisim in the shape of a hook.
(.6) Liquidiser, consisting of cylindrical glass screwed onto a plastic base with small metal six-pronged blade.
(.7) Hard white plastic lid for liquidiser, main fitting. Has a rubber ring around inside for sealing. Hole in centre of lid.
(.8) Liquidiser lid - inner fitting. Hard white plastic, "mushroom" shaped. Fits into the central hole in .7. There is a small hole in the centre of this inner fitting as well.
(.9) Juice extractor plastic funnel. Hard white plastic with a hole in centre, and a pipe extending downards from side.
(.10) Juice extractor slotted inner bowl. Fits into .9 Has a hole in centre. Hard white plastic.
(.11) Juice reamer. hard white plastic. Metal rod attached to centre, to attach to the mix master.
(.12) Juice extractor metal fitting (tapered adaptor). Small, metal pipe, with black rubber ring at base.
(.13) Juice extractor stainless steel spout. Pipe, curved in shape. Pipe is a 3/4 cylinder, open down vertical centre.
(.14) Metal mincer. A metal feeder extends vertically from mincer, to place food into. The mincer itself has a detachable ring which screws onto face of mincer to hold mincing screen and other parts in place. Embossed on body of mincer, "Kenwood/REGD."
(.15) Hopper, for mincer. Aluminium flat bottomed bowl with tube extending from base, to insert into feeder of mincer (.14).
(.16) Wooden cylindrical pusher with rounded knobbed handle, to push food through aluminium hopper into mincer.
(.17) Extra mincing screen. Round mincing screen with large holes to mince food more coarsely.
(.18) Oil dripper. Small aluminium rod with threaded section at top to attach to mixmaster (?) and blue rubber rings around aluminium "bolt" attached to this threaded section.
(.19) Instruction book titled "The/Kenwood/REGD./Chef/ INSTRUCTIONS/ and/TYPICAL RECIPES". In centre of cover is image of woman in white apron using the mixmaster, and images of food and the mix master in use around the central panel. Also:
- Brown envelope in which all leaflets and instruction book were enclosed. Printed in black "IMPORTANT/YOUR/Kenwood/INSTRUCTION & RECIPE BOOK/GUARENTEE CARD/PACKING LIST/ARE ENCLOSED HEREWITH/KENWOOD MANF. Co. LTD/WOKING - ENGLAND".
- Two identical leaflets on half A4 sized white paper, entitled "FITTING and OPERATING INSTRUCTIONS/for the/Kenwood/Regd./JUICE EXTRACTOR/& OIL DRIPPER
- 1 half A4 sized white paper leaflet entitled "The/Kenwood/Regd./ LIQUIDISER/ Attachment/Model A.712 Mk.III".
- 1 half A4 sized white paper leaflet entitled "The/Kenwood/Regd./ MINCER/ Attachment/Model A 716 Mark II"
- small piece of yellow paper with contents list, titled "Contents of this/ Kenwood/REG'D/Carton".
- 1 business card "swift CONSUMER PRODUCTS"
Department:
History DepartmentCollection
History Collection
Collection Item Data
Accession Number: | H2000.5.1-19 |
---|
Accession Date: | 20 Jun 2002 |
---|
Acquisition Year: | 1999 |
---|
Credit: | Sophie Cohen |
---|
Material
Metal/Metal | metal, plastic, wood, glass, ceramic, paper, ink
| 1 - mix master |
---|
Plastic/Synthetic/Polymer | 1 - mix master |
---|
Metal/Metal | 5 - dough hook |
---|
Glass/Glass | 6 - liquidiser |
---|
Plastic/Synthetic/Polymer | 6 - liquidiser |
---|
Metal/Metal | 6 - liquidiser |
---|
Plastic/Synthetic/Polymer | 7 - lid |
---|
Rubber/Natural Resin | 7 - lid |
---|
Plastic/Synthetic/Polymer | 8 - lid |
---|
Plastic/Synthetic/Polymer | 9 - funnel |
---|
Plastic/Synthetic/Polymer | 10 - slotted bowl |
---|
Plastic/Synthetic/Polymer | 11 - juice reamer |
---|
Metal/Metal | 11 - juice reamer |
---|
Stainless Steel/Metal | 13 - spout |
---|
Aluminium/Metal | 15 - hopper |
---|
Wood/Wood | 16 - wooden pusher |
---|
Metal/Metal | 17 - mincing screen |
---|
Aluminium/Metal | 18 - oil dripper |
---|
Rubber/Natural Resin | 18 - oil dripper |
---|
Paper/Paper | 19 - instruction book |
---|
Ink/Paper | 19 - instruction book |
---|
Rubber/Natural Resin | 6 - liquidiser |
---|
Measurement
The WA Museum is in the process of digitising its collections. This record may not have been reviewed by curatorial staff and may be inaccurate or incomplete. Research departments are continually working on these collections by adding new objects and reviewing existing content when new information is made available.