PATTERN, Fishplate
H1990.96
Pattern of wood, with metal identifying code numbers etc. inlet into top surface. Essentially, the pattern is used to make an impression in the casting sand so that a metal replica can be cast A good example of the pattern maker's / iron founder's trade. A fishplate is a long flat bar with six holes in it. It is used to join rail line ends, i.e. three bolts fasten each end of a rail to this plate. The plate is shaped to fit into the side recess of a standard railway line. Marks on upper surface: "80AS" "TE" "-1915" and "B". Marks on under surface: "B24955".
Department:
History DepartmentCollection
Accession Number: | H1990.96 |
---|---|
Accession Date: | 21 Mar 1990 |
Material
Wood/Wood | Wood, metal |
---|
Metal |
---|
Wood |
---|
Metal/Metal |
---|
Measurement
length | 770mm |
---|
width | 20mm |
---|
height | 90mm |
---|
The WA Museum is in the process of digitising its collections. This record may not have been reviewed by curatorial staff and may be inaccurate or incomplete. Research departments are continually working on these collections by adding new objects and reviewing existing content when new information is made available.
Enquiries can be emailed to reception@museum.wa.gov.au
Cite this page
Western Australian Museum Collections https://museum.wa.gov.au/online-collections/content/H1990.96
Accessed 26 Aug 2024
Rights
We support the open release of data and information about our collections.
Text content on this page is licensed under a Creative Commons Attribution 4.0 International License.
Image content on this page is copyright WA Museum.